Disc type Working width
M1 10 - 18 m
M2 20 - 24 m
WARNING!
Risk of injury from rotating spreading discs
The distribution unit (spreading discs, spreading vanes) may catch and pull in body parts or
objects. Contact with the distribution unit may injure, crush or cut off body parts.
u
Maximum admissible mounting heights at front (V) and rear (H) are to be complied with at all
times.
u
Ensure that nobody is present in the hazard zone of the machine.
u
Do not remove deflectors mounted on the hopper.
n
Structure of spreading disc M1
There are two identical spreading vanes on every spreading disc.
• A spreading vane comprises a main vane and an extension vane.
• The main vane of the right-hand spreading disc has the designation BR and the corresponding
extension vane has the designation AR.
• The main vane of the left-hand spreading disc has the designation BL and the corresponding
extension vane has the designation AL.
• The angle of each spreading vane can be adjusted forward and back, and the length can be
shortened or lengthened.
9. Spreading operation
76
5902916 MDS 8.2/14.2/18.2/20.2
To Next Page
Loading...
