You set the spreading vane to the position which you have determined in advance in the fertilizer
chart.
The spreading vane settings on the right-hand spreading disc are always the same as the
spreading vane settings on the left-hand spreading disc (with the exception of full border
spreading).
Example: C3-B2
WARNING!
Risk of injury due to sharp edges.
The spreading vanes have sharp edges.
There is a danger to the hands when changing or setting the spreading vanes.
u
Wear protective gloves.
u
Determine the position of the spreading vane in the fertilizer chart or by means of a test with the
practice test kit (optional equipment).
u
Remove the adjustment lever from the bracket.
w
See Fig. 8 Adjustment lever position
9. Spreading operation
MDS 8.2/14.2/18.2/20.2 5902916
79
To Next Page
Loading...
