Rauch MDS 8.2 - Page 78

Fig. 42: Spreading vane setting spreading disc M2, position W3; W: fixed length adjustment 1 to 6:
Angle settings
n
Functional principle
The spreading vanes on the spreading discs can be set to suit the various fertilization methods,
working widths and fertilizer types.
• Normal fertilizing
• Full border spreading during normal fertilizing (optionally right or left)
• Late fertilization
• Full border spreading during late fertilizing (optionally right or left)
n
Spreading vane angle settings
• Adjustment towards smaller numbers: The angle of the spreading vane is moved back.
• Adjustment towards larger numbers: The angle of the spreading vane is moved forward.
n
Length adjustment of the spreading vane (only M1 spreading disc)
• Shortening the spreading vane: The movable extension vane is moved towards the center of the
spreading disc and then locked.
• Extending the spreading vane: The movable extension vane is moved outward and then locked.
n
Spreading vane settings
9. Spreading operation
78
5902916 MDS 8.2/14.2/18.2/20.2