Instructions for Use MPR1 DATALOGGER
Manufacturer: zwo-399EN
RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany Rev. 9, 2020-10-16
Page 83 of 98
7.2.3 Sterilisation
Cables cannot be treated by autoclave and cannot be sterilised with hot air.
Prior to using a cleaned, disinfected and sterilised cable, check it for its technically functional safety.
In order to prevent accidental re-use, destroy disposable adhesive electrodes immediately after use.
7.3 Cleaning the mains adaptor
The mains adapter is not protected against moisture, and thus it must not get into contact with liquids.
If and when required at all, use a dry soft cloth to clean the mains adapter.
This document is for information only
To Next Page
Loading...