RAUMEDIC MPR2 logO - User Manual

To Next Page

Instructions for Use RAUMEDIC



MPR2 logO

Manufacturer: zwo-400EN

RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany Rev. 9 2020-09-22

Page 1 of 99

Instructions for Use

RAUMEDIC

MPR2 logO

REF 095254-001 and 095254-002

Firmware version

2.10.0068 HW2

This document is for information only

Main Page

Table of Contents2
General Notes5
Safety-Related Information6
Description of the Device8
Intended Purpose8
Description8
Intended Use8
Operational Environment8
Indications8
Conditions8
Body Parts or Types of Tissue Interacting with the Unit8
Frequency of Use8
Physiological Purpose8
Contraindications9
Main Operating Functions9
Operating Elements, Connections, Displays9
Keys with Dedicated Functions9
Keys with Context-Sensitive Functions9
Information and Warning Symbols12
Information and Warning Symbols on the Front Side12
Information and Warning Symbols on the Bottom Side and the Type Plate of the Unit13
Abbreviations15
Code Designations on the Connection Ports of the MPR216
Catheter Location and Signal Designations16
Patient Monitoring17
Invasive Pressure Measurement IBP17
General Aspects17
Preparation of the Invasive Pressure Measurement18
Preparation of the Invasive Pressure Measurement with External Transducer18
Preparation of the Invasive Pressure Measurement with Micro-Chip Precision Pressure Catheter18
Zero Calibration19
Zeroing RAUMEDIC Catheter19
Retention of Zero Value20
Conventional Zeroing20
Measurement of the Partial Oxygen Pressure20
General Aspects20
Preparation of the Catheter22
Measurement of the Body Temperature23
Preparing the Temperature Measurement23
Cleaning, Disinfecting and Sterilising the Temperature Sensor24
Analogue Outputs24
Interface for the Extension of the Apparatus24
PC Interface25
Operation of the MPR226
General Aspects26
Switching on the Apparatus26
Screen Selection26
Information Field27
Navigation Field27
Data Field27
Start Screen28
General Notes on the Key Functions29
Deleting the Memory29
Open a New Patient Documentation31
Selecting the Memory Mode32
No Storage33
View Last Measurement35
Selecting the Limiting Alarm Values36
Connecting the Transducer36
Operating Instructions - Connection Cable37
Transducer for Invasive Blood Pressure IBP37
Settings of Invasive Pressure Measurement39
Changing the Limiting Alarm Value Settings of Invasive Pressure Measurement41
Changing the Limiting Value41
Activating and Deactivating the Alarms42
Combine Analogue Outputs42
Invasive Pressure Measurement - Graphics43
Trend44
Measuring the CPP45
Partial Oxygen Pressure Sensor45
Connecting the Cable to the Catheter45
Connecting the Cable to the MPR246
Setting the Partial Oxygen Pressure46
Switching off Individual Measurement Functions During Po2 Measurement48
Switching off Po2 Measurement48
Switching off Temperature Measurement48
Switching off Pressure Measurement ICP249
Po2 Limiting Alarm Values49
Setting the Po2 Limiting Values50
Activating and Deactivating Po2 Alarms50
Po2 Graphics51
Po2 Trend52
Technical Alarms During Partial Oxygen Pressure Measurement53
Transducer for Temperature Measurement54
Changing the Temperature Settings56
Setting the Limiting Temperature Values56
Activating and Deactivating the Temperature Alarms57
Temperature Graphics57
Temperature Trend57
Configuring the Graphics Display58
Device Setup58
Combine Analogue Outputs58
Forwarding an Individual Pressure Signal to Out1 or Out258
Special Function Outpo60
Device Diagnostics62
Setting the LCD Contrast63
Setting the Language Version64
Setting Date and Time65
Setting the Time65
Setting the Date66
Modifying the Scaling67
Key Lock68
Switching on the LCD Background Illumination69
Alarm System69
Physiological Alarms71
Factory Settings72
Factory Settings and Adjustment Ranges for Physiological Alarms72
Alarm Signal Inactivation72
Scaling73
Saving the Alarm Settings73
Technical Alarms73
Apparatus Alarms73
Sensor Alarms74
Summarisation75
Verifying the Alarm System75
Power Supply76
Mains Power Supply76
Displays When Operating on Mains Power76
Battery Operation76
Displays When Operating on Battery76
Influence of the Storage Conditions on the Battery Operation76
Battery Maintenance77
Information on How to Handle Battery Packs77
Troubleshooting78
Special Advice on the Measurement of Partial Oxygen Pressure78
Error - Zero Calibration of Pressure Measurement Unit80
Internal Error - Pressure Channel80
Internal Error - Temperature80
Memory Full80
Residual Operating Time - Battery Pack80
Pressure Sensor Has Been Removed80
Temperature Sensor Has Been Removed81
Critical Error a81
Critical Error B81
Internal Error - Analogue Output81
Defective Fuses81
Reaction to Fault Messages and Indications82
Cleaning and Maintenance86
Cleaning the MPR286
Cleaning, Disinfecting and Sterilising the Cables and Sensors86
Cleaning86
Disinfection86
Sterilisation86
Cleaning the Mains Adapter86
Safety and Measurement Related Checks87
General Aspects87
Safety-Related Check87
Measurement-Related Check-Up87
Accessories88
Electromagnetic Compatibility89
Manufacturer's Declaration on the EMC Requirements According to IEC 60601-1-2:201489
Accuracy under the Influence of Electromagnetic Interference Phenomena89
General Information89
Electromagnetic Emissions90
Electromagnetic Immunity90
Manufacturer's Declaration on the EMC Requirements According to IEC 60601-1-2:200791
General Information91
Electromagnetic Emissions91
Electromagnetic Immunity92
Technical Parameters (Specification)95
Technical Data95
Environmental Conditions97
Operating and Storage Temperature97
Humidity97
Atmospheric Pressure97
Environment and Disposal97
Liability and Warranty97
Index98
Enclosures99

Need help?

Do you have a question about the RAUMEDIC MPR2 logO and is the answer not in the manual?

RAUMEDIC MPR2 logO Specifications

General

Brand	RAUMEDIC
Model	MPR2 logO
Category	Data Loggers
Language	English

Related product manuals

RAUMEDIC MPR1

98 pages

RAUMEDIC MPR2 logO - User Manual

Table of Contents

RAUMEDIC MPR2 logO Specifications

Related product manuals