Instructions for Use RAUMEDIC
MPR2 logO
Manufacturer: zwo-400EN
RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany Rev. 9 2020-09-22
Page 12 of 99
Figure 3: Optional stand holder [28] Figure 4: Optional table holder [29]
2.6 Information and warning symbols
2.6.1 Information and warning symbols on the front side
The symbol below the shift key [1] has the following significance:
The instructions for use must be read.
The triangular LED at the left-hand top has the following significance:
Display for alarms: Flashing yellow LED, if alarm has average priority. Flashing red LED, if alarm
has high priority. LED off, if no alarm.
The round LED at the left-hand top has the following significance:
LED to signal ON / OFF and stand-by (flashing green LED for battery-pack operation and stand-
by, green LED 100 per cent mains operation. Flashing red LED, if alarm has high priority.
This document is for information only
To Next Page
Loading...