Instructions for Use RAUMEDIC
MPR2 logO
Manufacturer: zwo-400EN
RAUMEDIC AG, Hermann-Staudinger-Strasse 2, 95233 Helmbrechts, Germany Rev. 9 2020-09-22
Page 25 of 99
3.6 PC interface
Type: USB
Number: 1
Where: Figure 2: Connection field, connection port [24]
Application: connection of laptop
Use approved accessories only.
By means of the USB cable (RAUMEDIC article No. 283949-001), this USB interface can be used to
connect a laptop, which by means of the DataView software (RAUMEDIC article No. 296900-001) is used
• for on-line display of the values measured.
• for the extended storage of the values measured on the HDU of the laptop.
• for off-line display of the values saved.
• for the administration of the patient data.
• for data export of the values measured to other data evaluation programs (e.g. MS-Excel).
• for printing out the courses measured.
Please keep in mind that the laptop has to be set up outside of the patient environment.
This document is for information only
To Next Page
Loading...