Installation: Installation Preparation 13
INSTALLATION
FIGURE 5. Lower Support Tab Hole Location
6. Clamp the template to the existing lower support bracket as shown below. Note the distance from the axle and
tower support to the hole location.
FIGURE 6. Weld-On Support Tab Position
7. Align the hole in the template with the hole in the support tab.
1.25”
3.724”
Axle
Inner Plate
1.25” from Axle
3.724” from Inner
Plate
Axle
Inner Plate
Template (107-0172-334)
Template Hole
To Next Page
Loading...
