CHAPTER 3
26 CAN Sidekick Pro Injection for Case IH 3/4XXX Installation and Operation Manual
FIGURE 30. Lower Tank Support Installed
HOSE GUARD INSTALLATION
1. Secure the hose guard along the lower tank support and secure with cable ties.
FIGURE 31. Hose Guard Installation
STIFFENER ROD INSTALLATION
1. Secure the stiffener rods to the upper and lower tank support using the provided 5/8” washers (two per bolt),
5/8” - 11 x 2” bolts, and 5/8” nyloc nuts.
5/8” Bolt
5/8” Washer
(Two Per
Bolt)
5/8” Nyloc Nut
5/8” x 2”
Bolt
5/8” Washer
(Two Per
Bolt)
5/8” Nut
Lower Tank Support
Bracket
P/N 116-0159-763
(Right); 116-0159-764
(Left)
Do Not Install Nuts
Until Safety Decal
Bracket is Installed
Lower Support Tab
To Next Page
Loading...
