Raymarine c95 - Remote Control Connection; Pairing the Remote and Configuring the up and down Buttons

22.1Remotecontrolconnection
Youcancontrolthemultifunctiondisplaywirelesslyusinga
Raymarineremotecontrolunit.
TheremotecontrolusesaBluetoothwirelessconnection.
D12 1 63 -2
1 32
1.Multifunctiondisplay.
2.Bluetoothconnection.
3.RaymarineBluetoothremotecontrol(forexample,RCU-3).
Tousetheremotecontrolyoumustrst:
•EnableBluetoothintheSystemSettingsonthemultifunction
display.
•Pairtheremotecontrolunitwiththemultifunctiondisplay.
22.2Pairingtheremoteandconguring
theUPandDOWNbuttons
Theremotecontrolunitmustbe“paired”withthemultifunction
displaythatyouwanttocontrol.Onyourmultifunctiondisplay,with
thehomescreendisplayed:
1.SelectSet-up.
2.SelectSystemSettings.
3.SelectConnections.
4.SelectBluetooth>On.
5.SelectNewBluetoothConnection.
Apop-upmessagewillbedisplayedtoconrmthatthedevice
youareconnectingtoisdiscoverable.
6.SelectOktoconrm.
7.Onyourremotecontrolunit,holddowntheUPandDOWN
buttonstogetherfor10seconds.
8.SelectOKtocleartheon-screenmessage.
Alistofdiscovereddevicesisdisplayed.
9.Selecttheremotecontrolunitinthelistofdevices.
10.Whenprompted,pressthearrowbuttononyourremotethatyou
wishtobeconguredastheUPbutton.Theotherarrowbutton
willautomaticallybeconguredastheDOWNbutton.
Ifthepairingwassuccessfula“PairingSuccess”messagewill
bedisplayed.Ifa“PairingFailure”or“PairingTimeout”message
isdisplayed,repeatsteps1to9.
212
e7/e7D/e95/e97/e125/e127/c95/c97/c125/c127