Raymarine c95 - Page 86

1.Selecttheactivewaypoint.
Thewaypointcontextmenuisdisplayed.
2.SelectStopGoto.
3.Alternatively,inthechartapplication,goto:Menu>Navigate
>StopGoto.
Note:Oncenavigationisnolongeractive,thewaypointsymbol
returnstoitsnormalstate,andthedashedlinebetweenyour
vesselandthewaypointisremoved.
Arrivingatawaypoint
Asyourvesselapproachesawaypoint,thewaypointarrivalalarm
providesawarning.
1.SelectOkonthewaypointarrivalalarmpopupmessage.
Oncethealarmisacknowledged,thenextwaypointisselected,and
thedisplayupdatestoindicatethenextlegoftheroute.
Note:Youcansettheapproachdistance(radius)atwhichthe
waypointarrivalalarmwillsoundusingtheAlarmsmenufromthe
homescreen:Set-up>Alarms>WaypointArrival.
CrossTrackError(XTE)
CrossTrackError(XTE)istheamountofdeviationfromyour
intendedrouteorwaypoint,expressedasadistance.
D117 65-2
XTE
Intheeventthatyousteeroff-track,youcangostraighttoyour
targetbyresettingXTE.
ResettingCrossTrackError(XTE)
Whilefollowingarouteinthechartapplication:
1.Selecttheroute.
Theroutecontextmenuisdisplayed.
2.SelectRestartXTE.
ResettingXTEresultsinanewcoursefromthecurrentvessel
positiontothecurrenttargetwaypoint.Thisdoesnotaffectyour
savedroute.
D12 295 -1
YoucanalsoresettheXTEfromtheNavigateMenu:Menu>
Navigate>RestartXTE.
Waypointinformation
Whenyoucreateawaypoint,thesystemassignsinformation
regardingthelocationmarked.Youcanviewandeditthedetailsof
anywaypointthathasbeencreatedandstored.
Thefollowinginformationisassignedorcapturedforeachwaypoint:
•Name
•Position(asLat/Lonandrange/bearingfromvessel.)
•T emperature(requiresappropriatesensor,onlyforwaypoints
capturedatthevesselposition.)
•Depth(requiresappropriatesensor,onlyforwaypointscaptured
atthevesselposition.)
•Dateandtime
•Comment(youcanaddyourowntextcommentstoawaypoint.)
•Symbol(adefaultsymbolisassigned,oryoucanselectan
alternative.)
Thereare2featureswhichallowyoutovieworeditwaypoint
information:
•Placethecursoroverawaypointonthe2DchartorRadarscreen
toviewselectedinformation.
•Usethewaypointlistforcomprehensiveinformationtoviewand
editasrequired.
•Youcanallocatewaypointstoawaypointgrouptomakewaypoint
managementeasier.
Displayingthewaypointlist
1.PresstheWPTbutton.
2.SelectViewWaypointList.
Thewaypointlistisdisplayed.
Note:Youcanalsoaccessthewaypointlistfromthehomescreen
andchartapplicationbygoingtotheMyDatamenuandselecting
WaypointList.
Waypointediting
Editingwaypointdetails
WiththeWaypointListdisplayed:
1.Selectthewaypointyouwanttoedit.
Thewaypointoptionsdialogisdisplayed.
2.SelectEditWaypoint.
3.Selecttheeldyouwanttoedit:Name,Group,Positionor
Comment.
4.Usetheon-screenkeyboardtomakethechanges,thenselect
theon-screenkeyboard’sSAVEbutton.
Editingawaypointonthechartorradarscreen
Fromthechartorradarapplication:
1.Selectthewaypoint.
Thewaypointcontextmenuisdisplayed.
2.SelectEditWaypoint.
Theeditwaypointdialogisdisplayed.
3.Selecttheeldyouwanttoedit.
4.Usetheon-screenkeyboardtomakethechanges,andthen
selecttheon-screenkeyboard’sSAVEkey.
Waypointsymbols
Therearearangeofsymbolstorepresentdifferentwaypointtypes.
SymbolTypeSymbolType
AirportAnchor
Billsh
Bottommark
BridgeBuoy
CansCar
CautionCircle
ConcreteCross
DiamondDiamondquarter
Diverdown
Diverdown(alternative)
DolphinDot
FadFish
86e7/e7D/e95/e97/e125/e127/c95/c97/c125/c127