Raymarine hsb2 PLUS - Depth Range (L1250 Plus and L1250 RC Plus Only); Sonar Simulator

Chapter 7: Setting Up the System Defaults 7-15
Depth Range
(L1250 Plus and
L1250RC Plus only)
The default setting is LARGE.
Depth Range (L1250 Plus and L1250RC Plus only)
The L1250 Plus and L1250RC Plus can be set to detect a maximum depth of
5000 ft (1700 m). However, other
hsb
2
devices only recognize a maximum
depth of 3000 ft (1000 m). If another
hsb
2
device is connected to the fishfinder,
you should leave the Depth Range at the default setting of 3000 ft. Set the
Depth Range for 5000 ft only if no other
hsb
2
device is connected.
Sonar Simulator
The simulator allows you to operate your display without data from the
transducer, in order to become familiar with the fishfinder features and
functions.