1-6
hsb
2
Plus Series Fishfinders
Operating Modes
Chartplotter
• Displays information from the C-MAP NT
®
and NT+ chart cards
(C-Cards)
• Three full-screen operating modes: Fishfinder, Chart, Data Log (if appro-
priate data is available)
• View fishfinder and chart simultaneously
• Choice of chart orientation: Head Up, Course Up and North Up
Operating Modes
If you have a combined Fishfinder/Chartplotter unit, or have an
hsb
2
Plus
Series Chartplotter connected to a Fishfinder, three full-screen modes –
fishfinder, chart and data log are available; you select the operating mode
using the DISPLAY key as described in Chapter 3.
You can also set Windows On to split the display into two half-screen windows
to show supplementary data, or to display fishfinder and chart simultaneously.
The main operating mode (fishfinder or chart) is displayed in the upper
window; you choose what is displayed in the lower window.
In addition, if you have an
hsb
2
Series Pathfinder Plus Radar display
connected, you can set the display to radar mode; this provides similar
functionality to a combined Pathfinder Radar/Chartplotter.
If you only have an L760 Plus or L1250 Plus fishfinder-only unit connected,
only fishfinder mode is available.