1-18
hsb
2
Plus Series Fishfinders
Trackpad and
Cursor
Note: During many operations you cannot move the cursor around the
screen; if you cannot move the cursor using the trackpad, check the default
soft keys are displayed (unless they have been switched OFF in system set up).
If not, press ENTER
until they are displayed.
The cursor is normally displayed as a crosshair. However, in chart mode, if
you have not moved the cursor for more than five seconds, when you next
move it the cursor is outlined by a circle so it is easier to locate on the screen.
Context-Sensitive Cursor Control
The cursor is context-sensitive. When the cursor is positioned over special
features on the display a text label appears to identify the feature as follows:
Some items on the fishfinder/chartplotter screen, such as the cursor have
information associated with them. Most information is displayed in a data
box. The context-sensitive cursor allows you to move databoxes. In the case of
Fishfinder VRM data, depth is displayed on the right hand side of the
horizontal indicator, and distance is displayed at the top of the vertical
indicator.
Table 1-2: Context-Sensitive Cursor Text Labels
Text Label Feature Fishfinder/Chart
BOX Data box (any type) Both
MOB Man Over Board marker Both
WPT Waypoint Both
BL Bottom Lock Fishfinder
VRM Variable Range Marker Fishfinder
ZOOM Zoom Fishfinder
A➟B
Ruler line Chart
COG Course Over Ground vector Chart
HDG Heading vector Chart
POS Vessel’s position Chart
RTE Route leg Chart
TIDE Tide vector Chart
Chart Icons Various Chart
To Next Page
Loading...
