Chapter 5: Operation 95
2. Using trackpad left/right, select ARCHIVES.
3. Using trackpad left/right, select MORE... and then WAYPOINT ARCH.
LIST.
Figure 5-16: Waypoint Archive List
4. A list of archived waypoint sets is displayed.
Note: When loading waypoint sets onto the chartplotter, you can either
add to the waypoints currently loaded on the chartplotter or replace the
waypoints currently loaded.
• To load a waypoint set from the archive:
Use trackpad up/down to select the waypoint set you wish to
load, use the trackpad left/right to select either ADD WAYPOINTS
or REPLACE WAYPOINTS and press ENTER.
ROUTE
ARCH.LIST
TRACK
ARCH.LIST
WAYPOINT
ARCH.LIST
MORE¬
D6255-1
01 WAYPNT01
WAYPOINTS ARCHIVES
ADD
WAYPOINTS
REPLACE
WAYPOINTS
DELETE
ARCHIVE
RENAME
ARCHIVE
D6262-1
To Next Page
Loading...
