70 RC400 GPS Chartplotter
Figure 5-4: Waypoint List
A waypoint also can be selected from the Waypoint List as described
in Working with Waypoints on page 47.
2. Select GOTO WAYPOINT.
A dotted line is drawn from the vessel’s current position to the
selected waypoint and navigation to the selected waypoint begins.
Go to Cursor
Note: If navigation is currently in progress or if the cursor is homed
(Find Ship) it is not possible to go to cursor.
➤ To navigate directly to the current cursor position:
1. Press and release the GOTO/MOB key and select GOTO CURSOR. The
GOTO CURSOR function now has help text appended to it:
2. Use the trackpad to position the cursor as desired.
3. Press ENTER to start the GOTO, or CLEAR to cancel the operation.
SIM NU
D4991-3
D4691_1
MOVE CURSOR, "ENTER" TO START
GOTO CURSOR, "CLEAR" TO QUIT
GOTO
CURSOR
To Next Page
Loading...
