76 RC400 GPS Chartplotter
Waypoint Data
The Waypoint Data display comprises text data occupying the whole
screen.
Figure 5-7: Waypoint Data
If a route is not selected, the ROUTE field displays NO ROUTE.
The WAYPOINT field shows the name of the waypoint. If the waypoint is
part of a route then the title field includes the waypoint index in the route.
If there is no target waypoint the text indicates NO WAYPOINT and all
waypoint data is shown as dashes, one per character. If a route is being
followed and the waypoint is not named, the text shows the waypoint
number within the route (as displayed on screen). If a GOTO Cursor or
Port is in progress, the text indicates GOTO CURSOR or GOTO <
Port
Name
>.
BRG, RNG and XTE data relate to the target waypoint.
Time refers to time data which is acquired from GPS information. Any
local time offset is set in the System Set Up menu, see Chapter 4.
The Time To Go (TTG) and Estimated Time of Arrival (ETA) data relate
to the target waypoint (not the whole route) and are based on the Speed
ROUTE
"CURRENT"
"HILLHEAD"
COG 313°T TIME 02:15 10/07/04
BRG 313° T
RNG 3.76 nm
WAYPOINT 01
SOG 5.0 Kts TTG 00:47
XTE 0.02nm ETA 03:02 10/07/04
STEER STARBOARD
> l
D6243-2
To Next Page
Loading...
