EasyManuals Logo

Raymarine RC400 User Manual

Raymarine RC400
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
iii
About this Handbook
Introduction
This handbook describes the RC400 Portable GPS Chartplotter. The
RC400 utilizes Satellite Differential (SD) signals for enhanced
navigational accuracy.
The RC400 GPS Chartplotter can be used portably with the supplied Ni-
MH batteries or fix-mounted while connected to ship’s power. The
equipment is comprised of:
4 in Color LCD display with Chart holder compartment for a Navion-
ics
®
Gold Chart electronic chart card
Internal GPS antenna
Battery tray for portable operation
The RC400 GPS Chartplotter can output GPS and Waypoint data to
operate with other equipment, such as an autopilot or repeater instrument
connected via the NMEA 0183 interface.
Note: This handbook contains important information about installing,
using and maintaining your new Raymarine product. To get the best from
the product, please read this handbook thoroughly.
Conventions Used
Throughout this handbook, dedicated buttons are referred to in bold
capitals (for example, ENTER). Functions, modes of operation and
options are shown in normal capitals (for example, LIGHT).
Operating procedures, which may consist of a single key-press, or a
sequence of numbered steps, are indicated by a symbol in the margin.
When textual data is displayed on screen, any unavailable data is shown
as dashes, one per character.
Where procedures refer to Select, this implies using the trackpad to
highlight a function and then pressing the ENTER key.
© Raymarine Limited 2004

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Raymarine RC400 and is the answer not in the manual?

Raymarine RC400 Specifications

General IconGeneral
BrandRaymarine
ModelRC400
CategoryGPS
LanguageEnglish

Related product manuals