50 RC400 GPS Chartplotter
Selecting a Waypoint
Positioning the cursor over a waypoint selects that waypoint and accesses
the WAYPOINT OPTIONS function bar. This enables you to GoTo
(described in Section 5.4), edit (name, symbol), erase or move the
waypoint.
Selecting a waypoint from the Waypoint List allows you to GoTo and edit
(symbol, name, position, erase) the waypoint. The Waypoint List also
provides options to make a new waypoint and transfer waypoints.
➤ To select a waypoint using the cursor:
1. Move the cursor over the waypoint; the WAYPOINT OPTIONS function
bar, together with help text, is displayed:
2. Press ENTER to select the waypoint function bar.
The selected waypoint can be edited via these functions.
➤ To select a waypoint using the Waypoint List:
1. Press ENTER to display the primary function bar.
2. Select WAYPOINTS and press ENTER to display the waypoint function
bar.
D4718-1
D4672-1
OBJECT
INFO
ARCHIVES
MORE¬
FIND SHIP ROUTES
WAYPOINTS
MORE¬
D6233-1
PLACE WPT
AT CURSOR
PLACE WPT
AT VESSEL
PLACE WPT
AT POS
WAYPOINT
LIST
D6236-1
To Next Page
Loading...
