Raymarine RC400 - Placing a Waypoint

To Next Page

To Previous Page

48 RC400 GPS Chartplotter

Placing a Waypoint

Note: It is not possible to place multiple waypoints at the same position.

➤ To place a new waypoint:

1. From chart mode, press ENTER; the primary function bar is displayed

2. Using trackpad left/right, select WAYPOINTS.

3. To place a waypoint at the cursor position:

i. Select PLACE WPT AT CURSOR. A description of the options avail-

able is displayed.

ii. Place the cursor in the desired position on the chart and press

ENTER to place the waypoint. The waypoint is added to the way-

point list and named using the next available number.

The waypoint functions remain displayed so that further way-

points can be placed.

Use EDIT WAYPOINT to name the waypoint as described in Editing

Waypoint Details on page 52.

iii.When finished placing waypoints, press CLEAR.

4. To place a waypoint at the vessel’s position:

Select PLACE WPT AT VESSEL. A new waypoint is placed at the ves-

sel’s current position. If there is no position data available then no

waypoint is placed.

OBJECT

INFO

Related product manuals