72 RC400 GPS Chartplotter
Stop Follow or Stop GoTo
➤ To stop following the route or target point:
1. Either press and release the GOTO/MOB key or move the cursor over
the target waypoint.
2. Select the STOP GOTO or STOP FOLLOW function:
The dotted line from the vessel to the target waypoint disappears.
5.5 Changing the Display Mode
Use the PAGE key to select the desired display mode. Repeat presses of
the PAGE key provide the following display modes:
• Set Up functions (see Chapter 4)
• Course Deviation Indicator (CDI)
• Bearing & Distance Indication (BDI)
• Waypoint data
• Navigation data
• Time/Date data
• Return to Chart display
Note: Press and release the GOTO/MOB key in any display mode to re-
turn to normal Chart display.
➤ To change the display mode:
1. Press the PAGE key to show the SET UP functions with SYSTEM SET UP
highlighted:
2. Repeat Step 1 to cycle through each of the available display modes.
D4
1
STOP
GOTO
RESTART
XTE
D4688_1
STOP
FOLLOW
RESTART
XTE
WAYPOINT
ADVANCE
D4699_1
SYSTEM
SETUP
CHART
SETUP
TRACK
SETUP
GPS
SETUP
To Next Page
Loading...
