80 RC400 GPS Chartplotter
The Time and Date fields show the local current time and date.
The TTG and ETA (WAYPOINT) data relates to the target waypoint. The TTG
and ETA (ROUTE) data relates to the end of the route.
All data is based on the SOG towards the current target. If the SOG is
negative, or data is not available, these fields are replaced with dashes,
one per character.
➤ To display Sunrise/Sunset information for a different date:
1. If the Set Up functions are displayed, press CLEAR to remove them;
press ENTER to display the position functions.
2. Select PREVIOUS DAY or NEXT DAY as desired to display Sunrise/Sun-
set information for a particular date.
3. Select TODAY to return the display to current date.
➤ To set the position data manually:
1. Display the Position functions as described for Sunrise/Sunset dis-
play above.
2. Select SET POSITION.
3. Select VESSEL POSITION, which sets the position to the current posi-
tion of the vessel.
—or—
Select SELECT POSITION, which enables specific Latitude/Longitude
data to be entered.
Use cursor left/right to select individual characters to edit.
Use cursor up/down to select the desired character.
4. Press ENTER to complete, or CLEAR to abort, the change(s).
SET
POSITION
PREVIOUS
DAY
TODAY
NEXT
DAY
D4992-1
To Next Page
Loading...
Need help?
General