System Components
1-6 SmartEdge 100 Router Hardware Guide
Gigabit Ethernet
Optical GE
2
2 2 None
Copper GE 2 2 None
1. On optical MICs, each port has separate connectors for the transmit (Tx) and receive (Rx) circuits.
2. For descriptions of the transceivers supported by this MIC, see the Transceivers for SmartEdge 100
Optical Ports document.
Note Protection for ports is dependent on the release of the SmartEdge OS.
Table 1-3 SmartEdge 100 MICs (continued)
Type of MIC/Description
Number
of MICs
Number of
MIC Ports
1
Protection Ratios
To Next Page
Loading...