EasyManuals Logo
Home>Redback Networks>Network Router>SmartEdge 100

Redback Networks SmartEdge 100 User Manual

Default Icon
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
Mounting the Chassis
4-4 SmartEdge 100 Router Hardware Guide
Reducing the Risk of ESD Damage
To reduce the risk of ESD damage, follow these guidelines:
Mounting the Chassis
To mount the SmartEdge 100 chassis, perform the following sequence of tasks:
1. Select the Chassis Position in the Rack
2. Select the Chassis Alignment
3. Install the Chassis Mounting Brackets
4. Install the Chassis
5. Install the Cable Management Brackets
Caution Risk of equipment damage. Electrostatic discharge (ESD) damage can occur when electronic
components are improperly handled. This damage can result in complete or intermittent failures
of SmartEdge router components. Follow these simple guidelines at all times to reduce the risk
of ESD damage to any of the SmartEdge router components:
Prior to handling any of the system components, always put on an ESD wrist strap or heel
strap, ensuring that it makes good contact with the skin.
Connect the wrist strap to any proper grounding surface; there is a convenience jack on the
front of the chassis.
Always handle all MICs by their handles or sides. Place a MIC on an antistatic surface or in
a static shielding bag when not installed in the chassis.
Avoid any contact between a MIC and your clothing.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Redback Networks SmartEdge 100 and is the answer not in the manual?

Redback Networks SmartEdge 100 Specifications

General IconGeneral
BrandRedback Networks
ModelSmartEdge 100
CategoryNetwork Router
LanguageEnglish