15
1. Using a Printer Server
Preparing Printer Server
This section explains how to configure the machine as a Windows network
printer. The machine is configured to enabling network clients to use it. When
the network printer is connected via SmartDeviceMonitor for Client, you can set
the printing notification function to notify clients of the results of their print jobs.
Important
❒ Under Windows 2000, Windows XP Professional, or Windows Server 2003, to
change printer properties in the [Printer] folder, you need Printer Manage-
ment access authentication; under Windows NT 4.0, Full Control access au-
thentication. Log on to the file server as an Administrator or member of the
PowerUsers group.
❒ Although the machine’s print server supports computers running Windows
Vista, SmartDeviceMonitor for Client cannot be installed on computers run-
ning Windows Vista.
A Open the [Printers] window from the [Start] menu.
The [Printers] window appears.
Under Windows XP or Windows Server 2003, [Printer and Fax] window ap-
pears.
B Click the icon of the machine you want to use. On the [File] menu, click
[Properties]. The printer properties appear.
C On the [Sharing] tab, click [Shared As: ].
D To share the machine with users using a different version of Windows,
click [Additional Drivers...].
If you have installed an alternative driver by selecting [Share As: ] during the
printer driver installation, this step can be ignored.
E Click [OK], and then close the printer properties.
To Next Page
Loading...
