Ricoh Aficio MP 2500 - Using Pure IP in the Netware 5; 5.1 or 6; 6.5 Environment

Using NetWare
21
1
D Select the printer you want to configure, and then click [Next].
A dialog box prompting you to perform the remaining configuration tasks in
the Web browser appears. Click [OK], and then wait until Web Image Monitor
starts automatically.
E Click [Login].
A dialog box for entering the login user name and password appears.
F Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
G Click [Configuration] in the left area, and then click [NetWare].
H Confirm the settings, and then click [OK].
Configuration is now complete. Wait several minutes before restarting Web
Image Monitor.
I Click [Logout].
Reference
p.19 “Setting Up as a Print Server (NetWare 3.x)”
Using Pure IP in the NetWare 5 / 5.1 or 6 / 6.5 Environment
Follow the procedure below to connect the machine as a print server in a pure IP
environment of NetWare 5 / 5.1 or NetWare 6 / 6.5.
Important
❒ When creating a queued print server in a pure IP environment of NetWare 5 /
5.1 or NetWare 6 / 6.5, create a print queue on the file server using NetWare
Administrator.
❒ This printer is not available as a remote printer for use in a pure IP environ-
ment.
❒ To use the printer in a pure IP environment, set it to IPv4.
Setting up using NWadmin
A From Windows, start NWadmin.
For details about NWadmin, see the NetWare manuals.
B Select the object in which the print queue is located in the directory tree,
and then click [Create] on the [Object] menu.
C In the [Class of new object] box, click [Print Queue], and then click [OK].
D In the [Print Queue Name] box, enter the name of the print queue.