Ricoh Aficio MP 2500 - Using Smartdevicemonitor for Admin

Monitoring and Configuring the Printer
36
2
Using SmartDeviceMonitor for Admin
Using SmartDeviceMonitor for Admin, you can monitor the network printers.
Also, you can change the configuration of the network interface board using
TCP/IP or IPX/SPX.
Important
❒ IPv6 cannot be used on this function.
❖ Protocol stack provided with Operating System
• Windows 95/98/Me
TCP/IP
IPX/SPX
NetWare
NetWare Client32 for Windows 95
IntraNetWare Client for Windows 95
Novell Client for Windows 95/98/Me
• Windows 2000
TCP/IP
IPX/SPX
NetWare
Novell Client for Windows NT/2000/XP
• Windows Server 2003
TCP/IP
IPX/SPX
•Windows XP
TCP/IP
IPX/SPX
Novell Client for Windows NT/2000/XP
•Windows NT 4.0
TCP/IP
IPX/SPX
Client Service for NetWare
NetWare Client32 for Windows NT
IntraNetWare Client for Windows NT
Novell Client for Windows NT/2000/XP
❖ Available operations
The following functions are available:
• Limits settings done from the control panel, and disables changes made to
certain items.
• Enables selection of paper type loaded in the machine.
• Switches to, and comes out of Energy Saver mode.
•Checks information about printing, paper quantity, etc.
• Simultaneously monitors multiple printers. When there are many printers,
you can create groups and classify printers to facilitate management.