Monitoring and Configuring the Printer
46
2
Changing Names and Comments
Follow the procedure below to change the names and comments of the machine.
A Start SmartDeviceMonitor for Admin.
B On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX]
or [IPv4 SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
C Select a machine in the list, and then click [NIB Setup Tool] on the [Tools]
menu.
NIB Setup Tool starts when the network interface board is default.
D Click [Web browser], and then click [OK].
A Web browser opens and the window for entering the login user name and
password for the Web Image Monitor administrator appears.
E Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
F Click [Configuration].
G Click [System] on the [Device Settings] area, and then change the settings.
H Click [OK].
I Click [Logout].
J Quit Web Image Monitor.
K Quit SmartDeviceMonitor for Admin.
Note
❒ In the [Device name] box, enter a device name on the machine using up to
31 characters.
❒ In the [Comment] box, enter a comment on the machine using up to 31 char-
acters.
To Next Page
Loading...
