Ricoh Aficio MP 2500 - Checking the Machine Status

Using SmartDeviceMonitor for Admin
45
2
F Enter the login user name and password, and then click [Login].
For details about the user name and password, consult your network admin-
istrator.
G Click [Configuration].
H Click [Program/Change Administrator] on the [Device Settings] area, and then
change the settings.
I Click [OK].
J Click [Logout].
K Quit Web Image Monitor.
L Quit SmartDeviceMonitor for Admin.
Checking the Machine Status
Follow the procedure below to check machine status.
A Start SmartDeviceMonitor for Admin.
B On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX]
or [IPv4 SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
C To obtain status details, select the machine in the list, and then click [Open]
on the [Device] menu.
The machine status appears in the dialog box.
D Click [System] or [Printer].
The machine status appears in the dialog box.
E Click [Close].
F Quit SmartDeviceMonitor for Admin.
Note
❒ For details about items in the dialog box, see SmartDeviceMonitor for Ad-
min Help.