Using SmartDeviceMonitor for Admin
39
2
Locking the Menus on the Machine's Control Panel
Follow the procedure below to lock the menus on the machine's control panel.
A Start SmartDeviceMonitor for Admin.
B On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX]
or [IPv4 SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
C Select a machine.
D On the [Tools] menu, point to [Device Settings], and then click [System].
A Web browser opens and the window for entering the login user name and
password for the Web Image Monitor administrator appears.
E Enter the login user name and password, and then click [Login].
For details about the user name and password, consult your network admin-
istrator.
The [System] page of Web Image Monitor appears. Enter required setting
items.
F Select [Level 1] or [Level 2] on the [Protect Printer Display Panel] in “General Set-
tings”.
G Click [OK].
H Click [Logout].
I Quit Web Image Monitor.
J Quit SmartDeviceMonitor for Admin.
Note
❒ For details about setting items, see Help in the [Device Settings] on [Configu-
ration] page.
To Next Page
Loading...
