Monitoring and Configuring the Printer
32
2
Note
❒ When using a host name under Windows Server 2003 with IPv6 protocol,
perform host name resolution using an external DNS server. The host file
cannot be used.
When user authentication is set
Login (using Web Image Monitor)
Follow the procedure below to log on when user authentication is set.
A Click [Login].
B Enter a login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
Note
❒ For user code authentication, enter a user code in [Login User Name], and
then click [Login].
❒ The procedure may differ depending on the Web browser used.
Log Off (using Web Image Monitor)
Click [Logout] to log off.
Note
❒ When you log on and made the setting, always click [Logout].
To Next Page
Loading...
