Using SmartDeviceMonitor for Admin
47
2
Load Fax Journal
A Start SmartDeviceMonitor for Admin.
B On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX]
or [IPv4 SNMPv3].
A list of machines using the selected protocol appears.
Select the protocol of the machine whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
C Select a machine in the list, and then click [Load Fax Journal] on the [Tools]
menu.
A Web browser opens and the window for entering the login user name and
password for the Web Image Monitor administrator appears.
D Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
Load Fax Journal area appears in the Web Image Monitor.
E Click [Logout].
F Quit Web Image Monitor.
G Quit SmartDeviceMonitor for Admin.
Note
❒ For details, see Help in [Load Fax Journal] area.
To Next Page
Loading...
