Using a Printer Server
28
1
Setting up using NIB Setup Tool
A Log on to the file server as an administrator or administrator equivalent.
B Start NIB Setup Tool from the [Start] menu.
C Click [Property Sheet], and then click [OK].
D Select the printer you want to configure, and then click [Next].
A dialog box prompting you to perform the remaining configuration tasks in
the Web browser appears. Click [OK], and then wait until Web Image Monitor
starts automatically.
E Click [Login].
A dialog box for entering the [Login User Name:] and [Login Password:] appears.
F Enter the user login name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
G Click [Configuration] in the left area, and then click [NetWare].
H Confirm the settings, and then click [OK].
Configuration is now complete. Wait several minutes before restarting Web
Image Monitor.
I Click [Logout].
Reference
p.19 “Setting Up as a Print Server (NetWare 3.x)”
To Next Page
Loading...
