Registering Addresses and Users for Facsimile/Scanner Functions
220
7
H Press [OK].
Note
❒ To change the name, key display and title, see “Changing a Registered
Name”.
Reference
p.205 “Changing a Registered Name”
p.220 “To change the fax number”
p.220 “To change the line”
p.221 “To change the SUB Code”
p.221 “To change the SEP Code”
p.221 “To set the International TX Mode”
p.221 “To select the fax header”
p.222 “To set label insertion”
Using a Fax Destination as a sender
A Press [Protection].
B Press [Sender] on the right side of Use Name as.
To change the fax number
A Press [Change]under Facsimile No..
B Enter the new fax number using the number keys, and then press [OK].
To change the line
A Press [Select Line].
B Select the line, and then press [OK].
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
