Ricoh BE-C1 D046 - Page 493

• Tray ift motor 2 connector loose, disconnected, broken.
• Paper or other foreign object has jammed tray lift motor 2.
• Pickup solenoid 2 connector is loose, disconnected, damaged.
• Paper or other foreign object has jammed pickup solenoid 2
• Lift sensor 2 defective
SC506 B
Cassette feed motor error
The cassette feed motor lock signal remained HIGH longer than 2 sec. during operation.
Note: When this SC occurs, paper feed from the cassette is not possible. However, roll
paper can feed from tray 1 and tray 2.
• Cassette feed motor harness loose, broken, defective
• Drive mechanism overload due to physical obstruction
• Motor driver PCB or motor defective
SC507 D
Main motor lock: registration
The registration motor lock signal remained high longer than 5 sec. during motor
operation.
• Motor harness loose, broken, defective
• Drive mechanism overloaded due to obstruction
• Motor driver PCB or motor defective
SC521 A
Drum motor error
The main motor lock signal remained HIGH for 5 sec. after the motor started.
• Motor harness loose, broken, defective
• Motor driver PDB or motor defective
SC531 D
Fusing drive motor error
The fusing drive motor lock signal remained HIGH for 5 sec.
• Fusing motor drive mechanism overloaded.
• Motor defective.
SC Tables
45
5