Ricoh BE-C1 D046 - Page 631

5840 IEEE 802.11b GW
6
Channel MAX
Sets the maximum range of the bandwidth for the wireless LAN. This bandwidth setting varies
for different countries.
NA/CHN: [1 to 11/1]
EU: [1 to 13/1]
7
Channel MIN
Sets the minimum range of the bandwidth for operation of the wireless LAN. This bandwidth
setting varies for different countries.
NA/CHN: [1 to 11/1]
EU: [1 to 13/1]
11
WEP Key Select
Determines how the initiator (SBP-2) handles subsequent login requests.
00: If the initiator receives another login request while logging in, the request is refused.
01: If the initiator receives another login request while logging in, the request is refused and
the initiator logs out.
10: Not used
11: Not used
Note: Displayed only when the wireless LAN card is installed.
42
Fragment Thresh
Adjusts the fragment threshold for the IEEE802.11 card.
[256 to 2346 / 2346 / 1]
This SP is displayed only when the IEEE802.11 card is installed.
43
11g CTS to Self
Determines whether the CTS self function is turned on or off.
[0 to 1 / 1 / 1] 0: Off, 1: On
This SP is displayed only when the IEEE802.11 card is installed.
44
11g Slot Time
Selects the slot time for IEEE802.11.
[0 to 1 / 0 / 1] 0: 20 μm, 1: 9 μm
System Service Mode
183
8