This SP is displayed only when the IEEE802.11 card is installed.
45
WPA Debug Lvl
Selects the debug level for WPA authentication application.
[1 to 3 / 3 / 1] 1: Info, 2: warning, 3: error
This SP is displayed only when the IEEE802.11 card is installed.
5841
Supply Name Setting GW
This SP allows you to enter the names of the supplies that will appear when you push [User
Tools] and then touch "Inquiry" on the operation panel display. After you open this SP,
touch the "Soft Key Board" button then use the keyboard to enter the names of the supplies.
5842 GWWS Analysis Mode Setting DFU GW
This is a debugging tool. It sets the
debugging output mode of each Net
File process.
Bit SW 0011 1111
Bit Groups
0 System & other groups (LSB)
1 Capture related
2 Certification related
3 Address book related
4 Machine management related
5 Output related (printing, delivery)
6 Repository related
5844 USB GW
1
Transfer Rate
Sets the speed for USB data transmission.
[Full Speed]
[Auto Change]
2
Vendor ID DFU
Sets the vendor ID:
Initial Setting: 0x05A Ricoh Company
8. Appendix: SP Mode Tables
184
To Next Page
Loading...
