4.System Maintenance
92
Network Installation
Download the system software from the internet and install it on E-25C via Windows PC and network
cable.
USB Installation
Download the system software from the internet and install it on E-25C via a USB flash drive.
The procedure at the customer site is easier than ‘Using the Network’ described above.
The USB flash drive must have a 16GB - 32GB capacity.
About Methods for Downloading System Software from the Internet
The system software for E-25C is loaded on the EFI cloud server.
To download the system software, you will need the Fiery Installer Builder (utility software), Windows
PC, and a login account (ID/password).
There are two methods to download the system software.
Using the Fiery Administrator Account
Using the EFI Sales Portal Account
To Next Page
Loading...
