30 November, 1999 BIT SWITCHES
4-23
Service
Tables
Printer Switch 03
No FUNCTION COMMENTS
0 Reduce the length of received
data
0: Disabled
1: Enabled
0: Incoming pages are printed without length
reduction.
Cross-reference
Page separation threshold: Printer Switch. 03,
bits 4 to 7.
1: Incoming pages are reduced in the
lengthwise direction when printing.
Cross-reference
Reduction ratio: Printer Switches 04/05
Page separation and data reduction: section 2-
2-12
1-3
Not used Do not change these settings.
4
to
7
Page separation threshold (with reduction disabled in switch 03 bit 0 above)
If the incoming page is up to x mm longer than the copy paper, the excess portion
will not print. If the incoming page is more than x mm longer than the copy paper,
the excess portion will print on the next page.
These four bits determine the value of x.
Hex value of bits 4 to 7 x (mm)
0 0
1 1
and so on until
F 15
Cross-reference
Page separation and data reduction: section 2-2-12
Length reduction On/Off: Printer Switch 03, Bit 0
To Next Page
Loading...
