Ricoh FAX2000L - Page 91

BIT SWITCHES 30 November, 1999
4-24
Printer Switches 04 and 05
No FUNCTION COMMENTS
0
to
7
Reduction ratios used for different paper sizes (with reduction enabled in switch
03-bit 0 above)
If reduction is enabled, the data will be reduced in the lengthwise direction before
printing.
These switches determine the maximum reduction ratio for each paper size.
Cross-reference
Page separation and data reduction: section 2.2.12.
Switch 04/05 US Europe Asia
Bit0 Not used A5 sideways A5 sideways
Bit1 Not used Not used Not used
Bit2 LT lengthwise Not used Not used
Bit3 Not used A4 lengthwise A4 lengthwise
Bit4 Not used Not used F lengthwise
Bit5 LG lengthwise Not used Not used
Bit6 Not used Not used Not used
Bit7 Not used Not used Not used
The available paper sizes depend on the country version of the machine.
Sw
Sw
.
.
:
,,,
04
05
0
0
4
3
1
0
4
3
0
1
8
7
1
1
12
11












=






=






=






=
Printer Switch 06 - Not used (do not change any of these settings)
Printer Switch 07 - Not used (do not change any of these settings)
Printer Switch 08 - Not used (do not change any of these settings)
Printer Switch 09 - Not used (do not change any of these settings)
Printer Switch 0A - Not used (do not change any of these settings)
Printer Switch 0B - Not used (do not change any of these settings)
Printer Switch 0C - Not used (do not change any of these settings)
Printer Switch 0D - Not used (do not change any of these settings)
Printer Switch 0E - Not used (do not change any of these settings)
Printer Switch 0F - Not used (do not change any of these settings)