2nd Transfer Fuser
Temp.
Media Type
Sets the Media type.
Plain paper, Thick Paper 2, Middle Thick Paper, Thick
Paper 1, Recycled Paper, Color Paper, Letterhead,
Preprinted Paper, Prepunched Paper, Label Paper, Bond
Paper, Cardstock, Envelope, Thick Post, Thin Paper
2nd Transfer Front
Adjusts the transfer roller current, based on the default
value.
[-15 to 15 / 0 (Default) / 1 A/step]
2nd Transfer Back
Adjusts the transfer roller current, based on the default
value.
[-15 to 15 / 0 (Default) / 1 A/step]
Fuser Temperature
Adjusts the temperature of the fusing unit, based on the
default value.
[-30 to 0 / 0 (Default) / 2°C/step]
5. System Maintenance Reference
132
To Next Page
Loading...
