Ricoh Printer/Scanner Unit Type 8000 User Manual

Removing Punch Waste
123
7
B Pull out the punch waste box carefully, and then remove punch waste.
C Reinstall the punch waste box.
D Close the finisher front cover.
“
Hole Punch Receptacle is full.” disappears.
Note
❒ If you do not reinstall the punch waste box in Step
C
, the “Hole Punch Re-
ceptacle is full.
” message continues to be displayed.
❒ If the message is still displayed, reinstall the punch waste box.
ANS020S
ANS021S

Ricoh Printer/Scanner Unit Type 8000 Specifications

General

Brand	Ricoh
Model	Printer/Scanner Unit Type 8000
Category	All in One Printer
Language	English