Appendix
194
5
❖ Duplex
• The following paper sizes and orientations allow the double-side copy.
A3L, B4 JISL, A4KL, B5 JISKL, A5KL, 11" × 17"L, 8
1
/
2
" × 14"L,
8
1
/
2
" × 11"KL, 5
1
/
2
" × 8
1
/
2
"KL, 8
1
/
2
" × 13"L, 8
1
/
4
" × 13"L, 8" × 13"L,
7
1
/
4
" × 10
1
/
2
"L, 11" × 15"L, 11" × 14"L, 10" × 15"L, 10" × 14"L,
8
1
/
4
" × 14"L, 8" × 10
1
/
2
"L, 210 × 340 mmL, 210 × 182 mmL,
210 × 170 mmK, 8KL, 16KKL
• You cannot use the following copy paper with this function:
• paper of a size smaller than A5, 5
1
/
2
" × 8
1
/
2
"
• Translucent paper
• Label paper (adhesive labels)
• OHP transparencies
• Paper thicker than 105 g/m
2
, 28 lb.
• Paper thinner than 64 g/m
2
, 17 lb.
•Postcards
•Tab stock
• When an odd number of originals is placed in the ADF, the back of the last
page of copied paper is blank.
• During copying, the image is shifted to allow for the binding margin.
• Front and back image quality of copies may differ.
❖ Combine
• In this mode, the machine selects the reproduction ratio automatically.
This reproduction ratio depends on copy paper sizes and the number of
originals.
• The reproduction ratios you can specify are 25-400%.
• If the calculated ratio is under the minimum ratio, it is automatically ad-
justed to within available range. However, with some ratios, parts of the
image might not be copied.
• You cannot use custom size paper.
• If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies properly.
• If the number of originals placed is less than the number specified for com-
bining, the last page segment is left blank as shown.
To Next Page
Loading...
Need help?
General
