Ricoh Printer - Page 399

• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
• Default: Auto Select
Active Protocol
You can select the effective protocol.
• IPv4
Active, Not Active
• Default: Active
• IPv6
Active, Not Active
• Default: Not Active
• NetWare
Active, Not Active
• Default: Active
• SMB
Active, Not Active
• Default: Active
• AppleTalk
Active, Not Active
• Default: Not Active
Ethernet Speed
You can select the network speed to operate the printer.
• Auto Select
• 10Mbps Half D.
• 10Mbps Full D.
Host Interface Menu
161
4