1. Press the [Media] hub [Custom Paper].
2. Select the check box of the paper to copy, and press [Edit].
3. Select the check box of the paper size to change, and then press [OK].
To specify all the paper sizes, select the check box of "Size".
When using a paper size that is not in the list, press [Add Size], and add the paper size to
use.
4. Specify the settings if "Paper Type", "Paper Color", and "Prepunched" are not
specified.
5. Press [Media Identification Unit].
6. Insert paper into the Media Identification Unit, and then remove it.
Hold the edges of the paper with both hands when inserting the paper.
Keep the paper flat as you pull it out.
3. Paper Settings
142
To Next Page
Loading...
