Ridder RB50EPLUS User Manual

TABLE OF CONTENTS
1. GUIDELINES, STANDARDS AND CONDITIONS
1.1 Applicable guidelines and standards 3
1.2 Approved personnel 3
1.3 Warning about discouraged use 3
1.4 Warranty provisions 3
2. SYMBOLS, WARNINGS AND SAFETY INSTRUCTIONS
2.1 Explanaon of warnings (ISO 3864-2) 3
2.2 Precauons and safety instrucons 4
2.3 Residual risks 5
2.4 Symbols and abbreviaons 5
3. PRODUCT DETAILS
3.1 Descripon 6
3.2 Applicaon 7
3.3 Dimensions 8
3.4 Technical specicaons 8
3.5 Idencaon 9
4. INSTALL INSTRUCTIONS
4.1 Special tools and equipment 9
4.2 Installaon - Condions and starng points 10
4.3 Installaon guiding prole and guiding unit 12
4.4 Aach the tube motor to the guiding unit 16
4.5 Aach the cable carrier 17
4.6 Aach the coupling piece to the tube motor 19
4.7 Aach the screen cloth and winding tube 20
5. CONNECT INSTRUCTIONS
5.1 Electrical material 22
5.2 Protecon - Condions and starng points 22
5.3 Wiring diagram: Single 24
5.4 Wiring diagram: Parallel 25
6. USER INSTRUCTIONS
6.1 Usage - Condions and starng points 26
6.2 Operaon 27
7. COMMISSIONING INSTRUCTIONS
7.1 Commissioning - Condions and starng points 27
7.2 Special tools and equipment 28
7.3 RB50Eᵖˡᵘˢ limit-switch system 28
7.4 Seng the end posions 29
7.5 Erasing one end posion 30
7.6 Erasing two end posions at the same me 31
8. MAINTENANCE INSTRUCTIONS
8.1 Maintenance general 32
8.2 Maintenance and cleaning RB50Eᵖˡᵘˢ tube motor and accessories 32
8.3 Maintenance and cleaning roller-screen system 32
9. SERVICE
9.1 Troubleshoong 33
9.2 Technical support 34
10. ENVIRONMENT
10.1 Waste disposal 35
10.2 Decommissioning and removal 35
Ridder Drive Systems
T +31 (0)341 416 854 F +31 (0)341 416 611 I www.ridder.com
2

Ridder RB50EPLUS Specifications

General

Brand	Ridder
Model	RB50EPLUS
Category	Engine
Language	English