Ridder RB50EPLUS - Precautions and safety instructions

2.2 Precauons and safety instrucons
Precauons
A roller-screen system can be dangerous. The correct safety precauons are important (safety
barriers, persons cannot touch the winding tube).
• If these precauons cannot be obeyed, then use warnings.
• The responsibility for precauons and warnings lies with the installer of the roller-screen system.
Refer to the, local or naonal, laws and regulaons of the country if a CE cercaon (to show
the safety is made sure) is necessary.
• Parts of the electrical or electronic installaons are connected to dangerous electrical voltages.
Work without professional competence or not obeyed warning instrucons could cause injury
and/or material damage.
• Ridder is not responsible for injury, material damage or consequenal damage if accessories that
Ridder did not make are used.
Safety instrucons
• Do not let persons and not approved personnel be near controls and roller-screen systems which
are in operaon.
• Damaged systems must be stopped immediately unl they are repaired.
• Do not operate roller-screen systems when persons are in the danger zone and can touch the
roller screen.
• Monitor the danger zone when you work with or near the roller screen.
• Stop and de-energize roller-screen systems during maintenance and cleaning work to or near the
system.
• Make sure that there is sucient space between parts that move and adjacent objects.
• Stay away from or safety areas where there is a risk to become caught in the system (tube-motor
guiding, roller screen).
• The torque and the duty cycle of the system must be in the range of the tube motor parameters.
Refer to §3.4/§3.5.
• Use safety barriers, for system parts that move, to a height of 2.5 m from the ground.
• Safety distances must agree with ISO 13857:2008.
May result in minor injury if the hazard is not avoided.
Signicant injury, possible death, if the hazard is not avoided.
Severe injury and possible death if the hazard is not avoided.
If you do not obey the safety instrucons that follow it can be
dangerous and cause injury.
Ridder Drive Systems
T +31 (0)341 416 854 F +31 (0)341 416 611 I www.ridder.com
4