Rigol 2000 Series Programming Guide

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-123
:LAN:MAC?
Syntax
:LAN:MAC?
Description
Query the MAC address of the instrument. This address is displayed on the oscilloscope in
“00-19-AF-30-00-00” format.
Return Format
The query returns the MAC address in string. For example, 0019af300000.
:LAN:MANual
Syntax
:LAN:MANual <bool>
:LAN:MANual?
Description
Enable or disable the static IP configuration mode; or query the current status of the static IP
configuration mode.
Parameter
Name Type Range Default
<bool> Bool {{0|OFF}|{1|ON}} 0|OFF
Explanation
 When the three IP configuration types are all turned on, the priority of the parameter configuration
from high to low is “DHCP”, “Auto IP” and “Static IP”. The three IP configuration types cannot be all
turned off at the same time.
 When the static IP configuration mode is valid, disable DHCP and Auto IP manually and users can set
the network parameters such as the IP address, subnet mask, gateway and DNS. For the setting of the
IP address, refer to the
:LAN:IPADdress command. For the setting of the subnet mask, refer to
the
:LAN:SMASk command. For the setting of the gateway, refer to the :LAN:GATeway command. For
the setting of DNS, refer to the
:LAN:DNS command.
Return Format
The query returns 0 or 1.

Rigol 2000 Series Specifications

General

Brand	Rigol
Model	2000 Series
Category	Test Equipment
Language	English