Rigol 2000 Series Programming Guide

RIGOL 2 Command System
2-124 MSO2000A/DS2000A Programming Guide
:LAN:INITiate
Syntax
:LAN:INITiate
Description
Initialize the network parameters. Before using this command, make sure that the oscilloscope has been
connected to the network correctly.
:LAN:IPADdress
Syntax
:LAN:IPADdress <string>
:LAN:IPADdress?
Description
Set or query the IP address of the instrument.
Parameter
Name Type Range Default
<string> ASCII string nnn,nnn,nnn,nnn --
Explanation
 When setting <string>, the range of the first nnn is from 0 to 223 (except 127) and the ranges of the
other three nnn are from 0 to 255.
 When using this command, the IP configuration mode should be Static IP mode (refer to
the
:LAN:MANual command) and DHCP and Auto IP are disabled.
Return Format
The query returns the current IP address in string.

Rigol 2000 Series Specifications

General

Brand	Rigol
Model	2000 Series
Category	Test Equipment
Language	English