Rigol 2000 Series Programming Guide

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-75
:CURSor:MANual
 :CURSor:MANual:TYPE
 :CURSor:MANual:SOURce
 :CURSor:MANual:TUNit
 :CURSor:MANual:VUNit
 :CURSor:MANual:CAX
 :CURSor:MANual:CBX
 :CURSor:MANual:CAY
 :CURSor:MANual:CBY
 :CURSor:MANual:AXValue?
 :CURSor:MANual:AYValue?
 :CURSor:MANual:BXValue?
 :CURSor:MANual:BYValue?
 :CURSor:MANual:XDELta?
 :CURSor:MANual:IXDelta?
 :CURSor:MANual:YDELta?
:CURSor:MANual:TYPE
Syntax
:CURSor:MANual:TYPE <type>
:CURSor:MANual:TYPE?
Description
Set or query the cursor type of manual cursor measurement.
Parameter
Name Type Range Default
<type> Discrete {TIME|AMPLitude} TIME
Explanation
 TIME: X cursors which are usually used to measure time parameters.
 AMPLitude: Y cursors which are usually used to measure voltage parameters.
Return Format
The query returns TIME or AMPL.

Rigol 2000 Series Specifications

General

Brand	Rigol
Model	2000 Series
Category	Test Equipment
Language	English